Flue gas detected outside the flue
Breakdown: the boiler is stopped
On the open-flue boilers (atmoTEC, turboTEC, atmoVIT, turboVIT), the flue gas sensor detected combustion gases escaping from the boiler instead of leaving by the chimney: blocked flue, weak draught, not enough air supply or a cooker hood pulling air. It is a safety shutdown: the boiler stops and only a technician should fix the problem.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Smell of flue gas in the house? Open doors and windows wide, switch the boiler off and call us.
- Do not reset and do not take anything apart: call us.
Does your boiler show F.36?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.36
The meaning depends on the boiler: find yours below.
Flue gas escape detected by the flue gas sensor
Exhaust gas escape detected
Flue gas escape detected
The boilers that show this code
What our technician checks
- The flue (blockage, defect)
- The chimney draught (chimney too cold)
- The room's air supply
- An extractor or cooker hood reversing the draught