Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
SIME Fault code SIME
20

Boiler not configured or mixed zone safety

Blocking: it retries by itself

This code does not mean the same on every boiler: on a Murelle.HT, the boiler has not been configured (parameters PAR 01 and PAR 02); on a Murelle HE R or an Atlantis HM fitted with a mixed zone board (ZONE MIX), the safety thermostat of the first mixed zone has tripped. In that second case, the pump of that zone stops and its mixing valve closes, but the boiler keeps running normally.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 20?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 20

The meaning depends on the boiler: find yours below.

20

Boiler configuration failed (parameters PAR 01 and PAR 02 not configured)

Blocking: it retries by itself Murelle.HT
20

FIRST MIXED ZONE SAFETY THERMOSTAT TRIPPED

Blocking: it retries by itself Atlantis HM, Murelle HE R

What our technician checks

  • The boiler configuration, parameters PAR 01 and PAR 02 (Murelle.HT)
  • The safety thermostat of the first mixed zone, on the ZONE MIX board (Murelle HE R, Atlantis HM)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.