Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
SIME Fault code SIME
07

Overheat safety thermostat tripped

Breakdown: the boiler is stopped

The boiler's safety thermostat (100 °C on a Murelle.HT, a Murelle Revolution or an Edea HM) has opened, for example because the water is not circulating well (air in the system, a stuck pump). The boiler locks out and only restarts after a reset; on a Murelle HE R or an Atlantis HM, it first waits one minute for the thermostat to close again.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 07?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 07

The meaning depends on the boiler: find yours below.

07

Safety sensor or thermostat tripped

Breakdown: the boiler is stopped Brava Slim HE, Murelle Revolution, Murelle.HT, Vera OF
07

Safety thermostat tripped

Breakdown: the boiler is stopped Edea HM, Uniqa Revolution
07

SAFETY/LIMIT THERMOSTAT FAULT

Breakdown: the boiler is stopped Atlantis HM, Murelle HE R

What our technician checks

  • The connections of the safety thermostat or sensor (flow sensor on a Uniqa Revolution)
  • Bleeding the air out of the system, and the automatic air vent
  • The pump rotor, which must not be stuck
  • The safety thermostat or sensor, replaced if needed

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.