Communication error with the HMI board
Blocking: it retries by itself
On the Tzerra M, the boiler no longer communicates with its HMI circuit board, because the connection box, which carries the control panel, is not connected. It is a blocking code: the status light on the button flashes green four times, our technician reads code Su:12 with a service tool, and the boiler starts again by itself once the connection is restored.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show Su:12?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code Su:12
The meaning depends on the boiler: find yours below.
Communication error with the HMI board
What our technician checks
- The wiring and connection of the connection box
Related codes
From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.