Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
25

Flow temperature rising too fast

Breakdown: the boiler is stopped

On the Remeha W40/60-m Eco, the temperature of the water leaving for the heating rises too fast, most often because the water is not circulating well: pump, flow through the boiler (radiators open) or water pressure. It is a lockout: the digits flash and the boiler only starts again after a reset (reset key).

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 25?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 25

The meaning depends on the boiler: find yours below.

25

Max. water temperature

Breakdown: the boiler is stopped W40/60-m Eco

What our technician checks

  • The circulation pump and its setting (1 or 2)
  • The water flow through the boiler: enough radiators open
  • The water pressure, at least 0.8 bar

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.