Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Junkers Fault code Junkers
A6

Combustion chamber spillage sensor faulty

Breakdown: the boiler is stopped

The spillage sensor at the combustion chamber, which switches the boiler off if flue gas escapes from the combustion chamber, is open or short-circuited: the sensor or its cable is faulty (boilers connected to a chimney: CeraclassExcellence ..-3 MFK and Eurostar ..-4 MFK). The boiler goes into fault; a reset can bring it back into service, but if the code comes back, our technician needs to test the sensor.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Do not reset the boiler: call us.

Does your boiler show A6?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code A6

The meaning depends on the boiler: find yours below.

A6

The flue gas spillage safety device at the combustion chamber has tripped or is short-circuited

Breakdown: the boiler is stopped ZWC-3
A6

The flue gas spillage safety device at the combustion chamber has tripped or has a short circuit

Breakdown: the boiler is stopped Eurostar ZWE-4

The boilers that show this code

What our technician checks

  • The spillage sensor at the combustion chamber, tested and replaced if needed
  • The sensor's connection cable

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.