Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Junkers Fault code Junkers
A4

Flue gas escaping at the draught diverter

Blocking: it retries by itself

Flue gas is flowing back through the draught diverter into the room where the boiler stands, and the spillage sensor has switched the boiler off (boilers connected to a chimney: CeraclassExcellence ..-3 MFK and Eurostar ..-4 MFK). It is a temporary stop: the boiler restarts by itself after about 20 minutes, but if the code comes back often, the chimney needs improving or the boiler needs servicing.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Wait: the boiler restarts by itself after about 20 minutes.
  3. Smell flue gas in the room? Switch the boiler off, open doors and windows, get everyone out and call us.
  4. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show A4?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code A4

The meaning depends on the boiler: find yours below.

A4

Flue gas escaping at the draught diverter

Blocking: it retries by itself Eurostar ZWE-4, ZWC-3

The boilers that show this code

What our technician checks

  • The chimney and how well it works

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.