Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Junkers Fault code Junkers
A2

Flue gas escaping from the combustion chamber

Blocking: it retries by itself

On a CeraclassExcellence ZWC-3 connected to a chimney (MFK model), the combustion chamber spillage safety device has switched the boiler off because flue gas was escaping from it. The boiler starts again by itself after about 20 minutes; if the code comes back often, the chimney needs improving or the boiler needs servicing.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Wait: the boiler starts again by itself after about 20 minutes.
  3. Smell of flue gas in the room? Switch the boiler off, open doors and windows and call us.
  4. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show A2?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code A2

The meaning depends on the boiler: find yours below.

A2

Flue gas escaping from the combustion chamber

Blocking: it retries by itself ZWC-3

The boilers that show this code

What our technician checks

  • The heat exchanger, for dirt
  • Servicing the boiler
  • The spillage safety device, tested (section 12.17 of the manual)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.