Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
388

Hot water sensor not working

Breakdown: the boiler is stopped

The controller reports that the domestic hot water sensor is not working; on a Trigon XL the cause given is a configuration error of input B3/B38, which takes the hot water sensor or thermostat. The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 388?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 388

The meaning depends on the boiler: find yours below.

388

DHW sensor no function

Breakdown: the boiler is stopped Trigon XL
388

DHW error no function

Breakdown: the boiler is stopped Trigon XXL
388

DHW sensor not working

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • The setting of input B3/B38: hot water sensor or thermostat (Trigon XL, Trigon XXL; line 5730 on a Thision S Plus or Trigon S Plus)
  • The hot water sensor, its cable and its connection (terminals 108 and 109 on a Trigon XL or XXL)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.