Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
353

Common flow sensor B10 missing

Breakdown: the boiler is stopped

The controller cannot find the common flow sensor B10, the sensor on the common flow of a cascade of boilers. The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 353?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 353

The meaning depends on the boiler: find yours below.

353

Cascade flow sensor B10 missing

Breakdown: the boiler is stopped Trigon XL
353

Common flow sensor B10 not available

Breakdown: the boiler is stopped Trigon XXL
353

Common flow sensor B10 missing

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • Whether the common flow sensor B10 is fitted, its cable and its connection
  • How B10 is configured in the cascade: sensor missing, configured twice or configured on a slave boiler (Trigon XL)
  • The setting of the sensor input that takes B10 (lines 5930 to 5932, common flow sensor B10, on a Thision S Plus or Trigon S Plus)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.