Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
309

Gas relay check failed

Breakdown: the boiler is stopped

On a Thision L Plus or Trigon L Plus, the boiler has checked the relay that drives the gas valve of burner 1 or 2 (the figure shown after the code) and this check has failed. This is a locking fault: the burner stays off until a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 309?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 309

The small number shown beside the code tells which.

309
1

Gas Relais check Failed

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus
309
2

Gas Relais check Failed

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus

What our technician checks

  • The gas valve: damage, corrosion and operation
  • The electrical connection of the gas valve on the control unit
  • The boiler control unit (circuit board)
  • Gas tightness, with leak detection fluid, after any work

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.