Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
112

Return sensor open or short-circuited

Breakdown: the boiler is stopped

On a Thision L Plus or Trigon L Plus, the sensor that measures the return water temperature of burner 1 or 2 (the figure shown after the code) is open or short-circuited: the boiler can no longer read this temperature. This is a locking fault: the burner stays off until a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 112?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 112

The small number shown beside the code tells which.

112
1

Return Sensor Open Short Circuit

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus
112
2

Return Sensor Open Short Circuit

Breakdown: the boiler is stopped Thision L Plus, Trigon L Plus

What our technician checks

  • The return sensor (T2) of the burner concerned and its wiring
  • The return sensor resistance, measured with the boiler switched off close to the sensor and compared with the table (NTC 10k)
  • The return temperature read in the diagnostics (24.10.6 or 24.11.6)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.