Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Daikin Fault code Daikin
U4

Indoor and outdoor unit communication problem

Breakdown: the boiler is stopped

On a Daikin Altherma 3 H HT, 3 H MT, 3 R, 3 H or 3 M heat pump, or an Altherma low temperature split, U4 reports a communication problem between the indoor and outdoor units; on an Altherma low temperature monobloc, between the hydro part and the refrigerant part, on an older Altherma EKHBH/EKHBX or EKHVH/EKHVX indoor unit, a communication failure, and on an Altherma high temperature EKHBRD, a transmission problem with the QA circuit board. The code stays on until a technician finds the cause and resets it, and on the Altherma 3 and low temperature units, frost protection is no longer guaranteed in the meantime.

What you can do

  1. Write down the code shown and the heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show U4?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code U4

The small number shown beside the code tells which.

U4

Communication failure

Breakdown: the boiler is stopped Altherma LT EKHB/EKHV
U4

QA transmission problem

Breakdown: the boiler is stopped Altherma HT
U4
00

Indoor/outdoor unit communication problem

Breakdown: the boiler is stopped Altherma 3 H, Altherma 3 H HT, Altherma 3 H MT, Altherma 3 M, Altherma 3 R, Altherma LT monobloc, Altherma LT split

What our technician checks

  • The communication between the indoor and outdoor units
  • The communication between the hydro part and the refrigerant part (Altherma low temperature monobloc)
  • The transmission with the QA circuit board (Altherma high temperature EKHBRD)
  • The unit's communication (EKHBH/EKHBX, EKHVH/EKHVX)
  • The Room frost protection setting and the use of the backup heater during the U4 error
  • The unit's connections and wiring, by a thorough visual inspection

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.