Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Daikin Fault code Daikin
P1

Open or unbalanced phase on power supply

Breakdown: the boiler is stopped

On a Daikin Altherma 3 H HT, 3 H MT, 3 R, 3 H or 3 M heat pump, P1 reports a power supply problem: an open phase or an imbalance between phases; on an Altherma high temperature EKHBRD, P1 instead reports a main compressor circuit board error, and on an older Altherma EKHBH/EKHBX or EKHVH/EKHVX indoor unit, a faulty circuit board. In every case it is a fault: the code stays on until a technician finds the cause and resets it.

What you can do

  1. Write down the code shown and the heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show P1?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code P1

The small number shown beside the code tells which.

P1

PCB failure

Breakdown: the boiler is stopped Altherma LT EKHB/EKHV
P1

Main compressor PCB error

Breakdown: the boiler is stopped Altherma HT
P1
00

Open-phase power supply imbalance

Breakdown: the boiler is stopped Altherma 3 H, Altherma 3 H HT, Altherma 3 H MT, Altherma 3 M, Altherma 3 R

What our technician checks

  • The power supply phases: open phase or imbalance
  • The supply voltage, compared with the one on the identification label
  • The main compressor circuit board (Altherma high temperature EKHBRD)
  • The circuit board (EKHBH/EKHBX, EKHVH/EKHVX)
  • The unit's connections and wiring, by a thorough visual inspection

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.