Inverter heat sink overheating or sensor fault
Breakdown: the boiler is stopped
On a Daikin Altherma 3 H HT, 3 H MT, 3 R, 3 H or 3 M heat pump, or an Altherma low temperature split or monobloc, L4 reports that the inverter's radiating fins in the outdoor unit are getting too hot; on an Altherma high temperature EKHBRD, the fin thermistor (temperature sensor) is faulty, and on an older Altherma EKHBH/EKHBX or EKHVH/EKHVX indoor unit, an electrical component. In every case it is a fault: the code stays on until a technician finds the cause and resets it.
What you can do
- Write down the code shown and the heat pump model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show L4?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code L4
The small number shown beside the code tells which.
Electric component failure
Fin thermistor error
OU: Malfunction of inverter radiating fin temperature rise
What our technician checks
- The inverter radiating fins and the cause of their temperature rise
- The fin thermistor and its wiring connections (Altherma high temperature EKHBRD)
- The unit's electrical components (EKHBH/EKHBX, EKHVH/EKHVX)
- The unit's connections and wiring, by a thorough visual inspection