Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
Fd

Reset key pressed by mistake

Breakdown: the boiler is stopped

The reset key was pressed by mistake; a short circuit to earth in the wiring of the temperature limiter or the gas valve can also give this code. Pressing the reset key once more is usually enough; on a Condens 7000iW, Fd 231 means something quite different, an interrupted mains voltage, and the boiler starts again by itself once the power is back.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Code Fd 231 on a Condens 7000iW: the boiler restarts by itself once the fault has cleared, do not reset it.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show Fd?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code Fd

The small number shown beside the code tells which.

Fd

The reset button has been pressed inadvertently

Breakdown: the boiler is stopped Condens 3000 W
Fd
231

Mains voltage interrupted

Blocking: it retries by itself GC7000iW

The boilers that show this code

What our technician checks

  • Pressing the reset key again
  • The wiring of the temperature limiter and the gas valve: short circuit to earth
  • For Fd 231: the mains voltage

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.