Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Bosch Fault code Bosch
FA

Flame detected after the gas is shut off

Breakdown: the boiler is stopped

After the gas has been shut off, the boiler still detects a flame: the gas valve, an electrode, the condensate trap or the flue is at fault. It is a fault: the boiler stops and only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show FA?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code FA

The small number shown beside the code tells which.

FA

Flame detected after gas shut-off

Breakdown: the boiler is stopped Condens 3000 W
FA
306

After gas shut-off: flame is detected

Breakdown: the boiler is stopped GC7000iW
FA
364

After gas shut-off: flame is detected

Breakdown: the boiler is stopped GC7000iW

The boilers that show this code

What our technician checks

  • The gas valve and its cables, replaced if needed
  • The condensate trap, cleaned
  • The electrodes and their cable: dirt, replaced if needed
  • The flue, cleaned or improved if needed

The same fault on other boilers

Recent boilers show alone the number older ones show beside the code.

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.