Circuit 1 pump mechanical fault
Blocking: it retries by itself
On a Vitodens One Base (200-W B2HF or B2KF, 222-F B2TF, 222-W B2LF, 242-F), the pump of heating circuit 1 has a mechanical fault. The boiler stops heating and no longer makes domestic hot water; it is not a lockout, but our technician needs to check the pump.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show F.797?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.797
The meaning depends on the boiler: find yours below.
Mechanical fault of heating circuit 1 circulation pump
What our technician checks
- The pump shaft, turned while pressing the coupling in the centre of the pump housing (appliance switched off)
- The impeller and the rotor, dirt removed; installation flushed and vented if needed
- Pump noises: gurgling (vent again), hissing or a hot pump (set the pump output)
- The circulation pump, to be replaced if it crackles or rattles