Flame missing or lost at burner start
Breakdown: the boiler is stopped
At start-up, the burner flame does not form or goes out right after forming, during the safety time. The burner has locked out for safety and the boiler stops heating until it is reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the gas supply valve is open and, on propane, that there is gas left in the tank.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show F.369?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.369
The meaning depends on the boiler: find yours below.
The flame signal is absent or too weak when the burner starts. Or loss of flame…
What our technician checks
- The gas supply: pressure and gas flow limiter
- Flue gas recirculation in the flue and air supply ducts
- The ionisation electrode: gap to the burner gauze, fouling