Air mass flow not detected correctly
Breakdown: the boiler is stopped
The fan unit does not measure the air flow through it correctly; causes are fouling of the air intake, the heat exchanger or the burner, flue gas building up in the flue, or a wrong setting when several boilers share the same flue. The burner goes into fault: the boiler stops heating and only starts again after a reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show F.349?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code F.349
The meaning depends on the boiler: find yours below.
Air mass flow
What our technician checks
- The fresh air intake and its fouling, cleaned if needed
- Flue gas building up in the flue system
- Fouling of the heat exchanger, cleaned if needed
- Fouling of the burner grid, cleaned if needed
- The « shared flue » setting when several boilers share one flue system
- The gas fan unit, replaced if the message recurs