Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Viessmann Fault code Viessmann
F.180

Gas pressure too low

Breakdown: the boiler is stopped

The gas pressure reaching the boiler is too low: gas supply valve closed, air in the gas line, too low a pressure on the supplier's network or a fouled gas valve. The burner goes into fault: the boiler stops heating and only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check that the boiler's gas supply valve is open.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show F.180?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code F.180

The meaning depends on the boiler: find yours below.

F.180

Gas pressure too low

Breakdown: the boiler is stopped Vitodens One Base

What our technician checks

  • Whether the gas supply valve is open, and bleeding the gas line
  • The gas supply pressure measured, and the gas supplier told if it is too low
  • The combined gas valve and its strainer, replaced if needed
  • The ignition unit during ignition: 230 V between X18.1 and X18.3 of the BCU
  • The ionisation electrode: gap, fouling and connection

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.