Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
E00.45

Domestic hot water sensor short-circuited

Breakdown: the boiler is stopped

The sensor that measures the domestic hot water temperature (on the Calenta Ace, at the outlet of the hot water heat exchanger) is short-circuited or reads above its measuring range: a bad connection or a faulty sensor. On the Calenta Ace, Calenta Ace-Matic and Tzerra Ace-Matic it is a lockout: the boiler stops and only starts again once the cause has been removed and the boiler has been reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E00.45?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E00.45

The meaning depends on the boiler: find yours below.

E00.45

DHW sensor short-circuited

Breakdown: the boiler is stopped Calenta Ace-Matic, Tzerra Ace-Matic
E00.45

DHW HX outlet closed

Breakdown: the boiler is stopped Calenta Ace

What our technician checks

  • The sensor's wiring and connectors, up to the circuit board
  • The sensor's operation and its resistance
  • The sensor, replaced if faulty

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.