Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
b62

Water pressure too low (optional sensor)

Blocking: it retries by itself

If the boiler has the optional water pressure sensor, that sensor reports a water pressure that is too low in the system: the boiler blocks (and, on the Gas 210 Eco, stops the pump it controls). It is a blocking message: the boiler returns to normal operation by itself once the water pressure is restored.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show b62?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code b62

The meaning depends on the boiler: find yours below.

b62

The water pressure sensor signals a water pressure that is too low

Blocking: it retries by itself Gas 210 Eco
b62

If a water pressure sensor is connected (option)

Blocking: it retries by itself Gas 310 Eco, Gas 610 Eco

What our technician checks

  • The system water pressure, to be topped up to the right level (above 0.8 bar on the Gas 210 Eco)
  • The water pressure sensor, its wiring and its connections
  • Gas 310 and 610 Eco: the sensor activated in the settings while it is not connected

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.