Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
b24

Return warmer than flow for 10 minutes

Blocking: it retries by itself

For more than 10 minutes, the water coming back to the boiler has been warmer than the water leaving it, while the boiler runs at minimum output: usually the flow and return sensors or pipes are swapped. It is a blocking message: the boiler starts again by itself once the return temperature drops again.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show b24?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code b24

The meaning depends on the boiler: find yours below.

b24

Return temperature > flow temperature for at least 10 minutes

Blocking: it retries by itself Gas 210 Eco
b24

Treturn exceeds Tflow + 2°C (e.g. 93°C if Tflow = 90°C) for more than 10

Blocking: it retries by itself Gas 310 Eco, Gas 610 Eco

What our technician checks

  • The flow and return sensors, which must not be swapped
  • The flow and return pipes, which must not be swapped

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.