Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
94

Heat exchanger hotter than the flow

Breakdown: the boiler is stopped

On Remeha Gas 310 Eco and Gas 610 Eco boilers, the heat exchanger, where the flue gases heat the water, is clearly hotter than the water leaving for the heating, most often because the water is not circulating well: pump, flow or water pressure. It is a lockout: the boiler stops, the code flashes, and it only starts again after a reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Check on the pressure gauge that the system water pressure is at least 0.8 bar. Lower? Top up with water if you know how, otherwise call us.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 94?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 94

The meaning depends on the boiler: find yours below.

94

Heat exchanger temperature > flow temperature + hysteresis

Breakdown: the boiler is stopped Gas 310 Eco, Gas 610 Eco

What our technician checks

  • Whether the circulation pump runs
  • The water flow through the boiler
  • The system water pressure, above 0.8 bar

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.