Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Remeha Fault code Remeha
77

Flame lost during operation

Breakdown: the boiler is stopped

The boiler lost the signal of its flame (ionisation) during operation, 4 restarts in a row within one heat demand: the manuals name flue gases coming back into the combustion air, too little air because of a blockage, or badly adjusted combustion. The boiler goes into lockout (the digits flash): do not reset it, our technician must first check the ducts and the combustion.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Do not reset the boiler: call us.

Does your boiler show 77?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 77

The meaning depends on the boiler: find yours below.

77

Ionisation fault during operation

Breakdown: the boiler is stopped Quinta 115, Quinta 25/30s 28/35c, Quinta 45/65, Quinta 85
77

Lack of ionisation during operation (after 4 new start attempts during one heat demand)

Breakdown: the boiler is stopped Gas 210 Eco
77

Loss of ionisation during operation (after 4restarts during 1 heat demand)

Breakdown: the boiler is stopped Gas 310 Eco, Gas 610 Eco

The boilers that show this code

What our technician checks

  • Flue gas recirculation: tightness of the heat exchanger, fitting of the flue system and terminal
  • The fan and whether the air and flue ducts are clear
  • The combustion setting (CO2 / O2)
  • Quinta 115: the gas supply (blockage, pressure regulator, gas pressure too low)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.