Burner lockout: no flame
Breakdown: the boiler is stopped
The burner's control and safety box has locked out because it detected no flame during the ignition safety time (I■■■■, gas burners with a DMG box and oil burners with a DKO 972, 976, 992 or 996 box), or because the flame went out while running (■■■■I, gas burners with a DMG box). The burner stays off until it is reset with the reset button on the box.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Oil burner: check that there is still oil in the tank.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show I■■■■?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code I■■■■
The meaning depends on the boiler: find yours below.
Lockout during the safety time.
Lockout during the safety time
Flame loss.
What our technician checks
- The burner's gas or oil supply
- The ionisation probe or flame detection cell, cleaned, adjusted or replaced
- The ignition electrodes, their leads and the ignition transformer
- The gas valve, its wiring and air in the gas line (gas burners)
- The gas/air mixture, flame stability and the combustion setting
- Oil suction: shut-off valves, tank filter or strainer, tightness of the suction line (oil burners)
- Earthing and the phase and neutral connection (gas burners)
- The control and safety box, replaced if it stays locked out after the first reset