Flow-return temperature difference too large
Blocking: it retries by itself
The difference between the temperature of the water leaving for the heating and the water coming back has gone above its maximum, because the water is not flowing enough through the system or because of a sensor. On the GMR 3000 and GMR 5000 Condens it is a blocking message: the boiler stops and starts again by itself once the cause is gone.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Check that the radiator valves are open.
- Check the water pressure on the display: below 0.8 bar, top up with water as the user manual explains (recommended pressure 1.5 to 2.0 bar).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show B07?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code B07
The meaning depends on the boiler: find yours below.
Maximum difference between flow and return temperature exceeded
The boilers that show this code
What our technician checks
- Water circulation: direction, pump and valves
- The system water pressure
- How clean the heat exchanger is
- Operation of the sensors and how the boiler sensor is fitted