Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Mitsubishi Electric Fault code Mitsubishi Electric
E0-E5

Communication failure with the main remote controller

Breakdown: the boiler is stopped

On an Ecodan heat pump (FTC4 to FTC7, F generation), a code from E0 to E5 means the main remote controller no longer communicates with the FTC controller; the manual has the connection cable checked (damage, loose connections). It is a fault that does not clear by itself: our technician clears the code (reset) once the cause has been found.

What you can do

  1. Write down the code shown and the heat pump model (on the rating plate).
  2. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show E0-E5?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E0-E5

The meaning depends on the boiler: find yours below.

E0-E5

Communication failure between main controller and FTC4

Breakdown: the boiler is stopped Ecodan FTC4
E0-E5

Communication failure between main remote controller and FTC

Breakdown: the boiler is stopped Ecodan F generation, Ecodan FTC5, Ecodan FTC6, Ecodan FTC7

What our technician checks

  • The connection cable between the main remote controller and the FTC: damage or loose connections
  • On the F generation, if [Reset] does not appear: all indoor and outdoor unit circuit breakers off and on again

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.