Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
70

Buffer tank sensor 1 fault

Breakdown: the boiler is stopped

The controller reports a fault of temperature sensor 1 of the system's buffer tank. The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 70?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 70

The meaning depends on the boiler: find yours below.

70

Buffer storage tank temperature 1 sensor error

Breakdown: the boiler is stopped Trigon XXL
70

Buffer tank temperature sensor 1 fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • Buffer tank sensor 1, its cable and its connection
  • The setting of the sensor input that takes it (buffer tank sensor B4, B41 or B42, lines 5930 to 5932 on a Thision S Plus or Trigon S Plus)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.