Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
54

Hot water primary controller sensor fault

Breakdown: the boiler is stopped

The controller reports a fault of the domestic hot water primary controller sensor (the main controller of the hot water production). The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 54?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 54

The meaning depends on the boiler: find yours below.

54

DHW primary controller sensor error

Breakdown: the boiler is stopped Trigon XXL
54

DHW primary controller sensor fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • The hot water primary controller sensor, its cable and its connection
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.