Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
50

Hot water sensor 1 fault

Breakdown: the boiler is stopped

The sensor or thermostat that measures the domestic hot water temperature (cylinder) is faulty. On a Trigon XL, Trigon XXL, Thision S Plus or Trigon S Plus the manual lists this code among the lockouts, to be reset once the cause is removed; on a Straton XL the controller reports it and the manual does not speak of a lockout.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 50?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 50

The meaning depends on the boiler: find yours below.

50

DHW temperature sensor/thermostat 1 fault

Breakdown: the boiler is stopped Trigon XL
50

DHW temperature 1 sensor error

Breakdown: the boiler is stopped Trigon XXL
50

DHW temperature sensor 1 fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus
50

DHW sensor 1

Blocking: it retries by itself Straton XL

What our technician checks

  • The hot water sensor or thermostat (B3), its cable and its connection
  • The B3/B38 input setting: sensor or thermostat, matching what is connected
  • The sensor resistance, boiler switched off (NTC 10 kΩ on a Trigon XXL)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.