Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
331

Sensor input BX2 not working

Breakdown: the boiler is stopped

The controller reports that its sensor input BX2 is not working (on a Trigon XL this input takes the header or heat exchanger flow sensor, on a Trigon XXL the header temperature sensor). On a Trigon XL, Trigon XXL, Thision S Plus or Trigon S Plus the boiler goes into safety lockout and the cause must be removed before it is reset; on a Straton XL the code shows as a technical fault.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. On a Trigon XL, Trigon XXL, Thision S Plus or Trigon S Plus, the boiler has gone into safety lockout.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.
  5. On a Straton XL this code is a technical fault: do not reset the boiler.
  6. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 331?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 331

The meaning depends on the boiler: find yours below.

331

Sensor input BX2 no function

Breakdown: the boiler is stopped Trigon XL
331

Sensor BX2 no function

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus, Trigon XXL
331

BX2 no function

Blocking: it retries by itself Straton XL

What our technician checks

  • The sensor on input BX2, its cable and its connection (terminals 104 and 105 on a Trigon XL or XXL)
  • The function set for input BX2 (programming line 5931 on a Thision S Plus, Trigon S Plus or Straton XL)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.