Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
46

Cascade return sensor fault

Breakdown: the boiler is stopped

The controller reports a fault of the cascade return temperature sensor (system with several boilers). The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 46?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 46

The meaning depends on the boiler: find yours below.

46

Return temperature cascade sensor error

Breakdown: the boiler is stopped Trigon XXL
46

Cascade return temperature sensor fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • The cascade return sensor, its cable and its connection
  • The setting of the sensor input that takes it (lines 5930 to 5932, cascade return sensor B70, Thision S Plus and Trigon S Plus)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.