Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
38

Primary controller flow sensor fault

Breakdown: the boiler is stopped

The controller reports a fault of the flow temperature sensor of the primary controller (the system's main controller). The boiler goes into safety lockout and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 38?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 38

The meaning depends on the boiler: find yours below.

38

Flow temperature primary controller sensor error

Breakdown: the boiler is stopped Trigon XXL
38

Flow temperature primary controller sensor fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • The primary controller flow sensor, its cable and its connection
  • The function of the extension module that runs the primary controller (lines 6020 to 6022, primary controller/feed pump, Thision S Plus)
  • The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.