Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
372

Heating circuit 3 limit thermostat

Breakdown: the boiler is stopped

The thermostat that limits the temperature of heating circuit 3 has tripped, and the controller is reporting it. On a Trigon XXL or a Trigon S Plus this code is one of the lockouts: the boiler stops and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 372?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 372

The meaning depends on the boiler: find yours below.

372

Limit thermostat heating circuit 3

Breakdown: the boiler is stopped Trigon XXL
372

Temperature controller heating circuit 3

Breakdown: the boiler is stopped Trigon S Plus

What our technician checks

  • The limit thermostat of heating circuit 3, its setting and the reason it tripped
  • The « heating circuit thermostat » function of input EX21 of the extension module (lines 6024 to 6028)
  • The voltage on input EX21, 0 V or 230 V, in the input test (lines 7950 to 7952)
  • The operation and setting of all connected safety devices
  • The software diagnostic code and the fault history (lines 6705 and 6800 onwards)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.