Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
335

Sensor input BX21 has no function

Breakdown: the boiler is stopped

The controller reports that sensor input BX21 of an extension module (EM1, EM2 or EM3) has no function: the setting of that input does not match what is connected to it. On a Trigon XXL or a Trigon S Plus this code is one of the lockouts: the boiler stops and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 335?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 335

The meaning depends on the boiler: find yours below.

335

Sensor BX21 no function (EM1, EM2 or EM3)

Breakdown: the boiler is stopped Trigon S Plus, Trigon XXL

What our technician checks

  • The setting of input BX21 of the extension modules (lines 6040, 6042 and 6044) and the sensor wired to it
  • The temperature read on input BX21 in the input test (lines 7830, 7832 and 7834)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.