Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
325

Same sensor on BX and extension module

Breakdown: the boiler is stopped

The same sensor is set twice, on a BX sensor input of the boiler and on an input of an extension module: this is a mistake in the installation settings. On a Trigon XXL, a Thision S Plus or a Trigon S Plus this code is one of the lockouts: the boiler stops and the cause must be removed before it is reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show 325?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 325

The meaning depends on the boiler: find yours below.

325

BX / extension module same sensors

Breakdown: the boiler is stopped Trigon XXL
325

BX / extension module same sensor

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus

What our technician checks

  • The functions set on the BX sensor inputs of the boiler (lines 5930 to 5933)
  • The functions set on inputs BX21 and BX22 of the extension modules (lines 6040 to 6045)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.