Alarm contact H6 active
Breakdown: the boiler is stopped
The alarm contact on input H6 of the controller is active: an external device wired to that input is reporting a problem. On a Trigon XXL, a Thision S Plus or a Trigon S Plus this code is one of the lockouts: the boiler stops and the cause must be removed before it is reset.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
Does your boiler show 173?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 173
The meaning depends on the boiler: find yours below.
Alarm contact H6 active
What our technician checks
- The device wired to input H6 that raised the alarm, and the cause of that alarm
- The state of contact H6 in the input test (line 7872)
- The wiring of the contact to terminal H6 of the controller
- The operation and setting of all connected safety devices
- The software diagnostic code and the fault history (lines 6705 and 6800 onwards)