Flow and return difference too large
Blocking: it retries by itself
The temperature difference between the water leaving the boiler (flow) and the water coming back (return) is too large. This is not a lockout: the boiler starts again by itself as soon as the cause is gone.
What you can do
- Write down the code shown, the number next to it if there is one, and the boiler model (on the rating plate).
- Check the water pressure: at least 1 bar, or the needle in the green zone of the pressure gauge. Too low? Top up with the boiler cold, the way your installer showed you.
- Check that enough radiators are open.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 349?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
Choose a real expert
Ecowatt is an approved Buderus System Partner: factory training in Germany, direct access to spare parts, one contact.
The variants of code 349
The small number shown beside the code tells which.
Difference between flow and return temperatures too large
The boilers that show this code
What our technician checks
- The shutoff valves, open
- The water pressure: topped up and vented if it is too low
- An open thermostatic valve
- The flow and return temperature sensors, replaced if needed
- The pump, replaced if needed