Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
65

Room sensor 2 fault

Breakdown: the boiler is stopped

The controller reports a fault of room temperature sensor 2, the one in the room unit (QAA75) that measures the temperature in the home. On a Trigon XXL, Thision S Plus or Trigon S Plus the boiler goes into safety lockout and the cause must be removed before it is reset; on a Straton XL the code shows as a technical fault.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. On a Trigon XXL, Thision S Plus or Trigon S Plus, the boiler has gone into safety lockout.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.
  5. On a Straton XL this code is a technical fault: do not reset the boiler.
  6. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 65?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 65

The meaning depends on the boiler: find yours below.

65

Room temperature 2 sensor error

Breakdown: the boiler is stopped Trigon XXL
65

Room temperature sensor 2 fault

Breakdown: the boiler is stopped Thision S Plus, Trigon S Plus
65

Room sensor 2

Blocking: it retries by itself Straton XL

What our technician checks

  • Room unit 2 and its connection to the controller (terminals 130 to 132 on a Trigon XXL, CL+ and CL- on a Straton XL)
  • The type of room unit: wired QAA75 or wireless QAA78 (Thision S Plus, Trigon S Plus)

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.