Flow temperature sensor 1 fault
Breakdown: the boiler is stopped
The controller reports a fault of flow temperature sensor 1, the flow sensor of heating circuit 1 (B1 on a Straton XL). On a Trigon XXL, Thision S Plus or Trigon S Plus the boiler goes into safety lockout and the cause must be removed before it is reset; on a Straton XL the code shows as a technical fault.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Trigon XXL, Thision S Plus or Trigon S Plus, the boiler has gone into safety lockout.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On a Straton XL this code is a technical fault: do not reset the boiler.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 30?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 30
The meaning depends on the boiler: find yours below.
Flow temperature 1 sensor error
HC flow temperature sensor 1 fault
Flow temperature sensor 1 fault
Flow sensor 1
What our technician checks
- The circuit 1 flow sensor, its cable and its connection (B1 on a Straton XL)
- The sensor's resistance, measured as close to the sensor as possible and compared with the maker's values