Heating circuit 2 limit thermostat
Breakdown: the boiler is stopped
The thermostat that limits the temperature of heating circuit 2 has tripped, and the controller is reporting it. On a Trigon XXL or a Trigon S Plus this code is one of the lockouts: the boiler stops and the cause must be removed before it is reset; on a Straton XL the controller reports a technical fault, which our technician has to fix.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Trigon XXL or a Trigon S Plus, the boiler locks out: one reset is allowed.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On a Straton XL, do not reset the boiler: the controller is reporting a technical fault.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 179?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 179
The meaning depends on the boiler: find yours below.
Limit thermostat heating circuit 2
Temperature controller heating circuit 2
Thermostat HC2
What our technician checks
- The limit thermostat of heating circuit 2, its setting and the reason it tripped
- The « heating circuit thermostat » function of input EX21 of the extension module (lines 6024 to 6028)
- The voltage on input EX21, 0 V or 230 V, in the input test (lines 7950 to 7952)
- The operation and setting of all connected safety devices
- The software diagnostic code and the fault history (lines 6705 and 6800 onwards)