Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
Elco Fault code Elco
172

Alarm contact H2 or H5 active

Breakdown: the boiler is stopped

A contact wired to input H2 of an extension module (EM1, EM2 or EM3) or to input H5 of the controller, set as an alarm input, has become active (on a Straton XL: alarm contact 2, input H2). On a Trigon XXL or Trigon S Plus the boiler goes into safety lockout and the cause must be removed before it is reset; on a Straton XL the code shows as a technical fault.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. On a Trigon XXL or Trigon S Plus, the boiler has gone into safety lockout.
  3. Reset the boiler once only.
  4. If the code comes back, do not keep trying and do not take anything apart: call us.
  5. On a Straton XL this code is a technical fault: do not reset the boiler.
  6. Does the code stay on or come back? Do not take anything apart: call us.

Does your boiler show 172?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code 172

The meaning depends on the boiler: find yours below.

172

Alarm contact H2 (EM1, EM2 or EM3) or H5 active

Breakdown: the boiler is stopped Trigon S Plus, Trigon XXL
172

Alarm contact 2 active (H2)

Blocking: it retries by itself Straton XL

What our technician checks

  • The device or contact wired to input H2 of the extension module or to input H5, and the reason for its alarm
  • The function set for the module's input H2 (line 6046 for module 1) or H5 (line 5977), and the contact's action

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.