Alarm contact H1 or H4 active
Breakdown: the boiler is stopped
A contact wired to input H1 or H4 of the controller, set as an alarm input, has become active (on a Straton XL: alarm contact 1, input H1). On a Trigon XXL, Thision S Plus or Trigon S Plus the boiler goes into safety lockout and the cause must be removed before it is reset; on a Straton XL the code shows as a technical fault.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- On a Trigon XXL, Thision S Plus or Trigon S Plus, the boiler has gone into safety lockout.
- Reset the boiler once only.
- If the code comes back, do not keep trying and do not take anything apart: call us.
- On a Straton XL this code is a technical fault: do not reset the boiler.
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show 171?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code 171
The meaning depends on the boiler: find yours below.
Alarm contact H1 or H4 active
Alarm contact 1 active (H1)
What our technician checks
- The device or contact wired to input H1 or H4, and the reason for its alarm
- The function set for inputs H1 and H4 (lines 5950 and 5970, error/alarm message) and the contact's action