Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
De Dietrich Fault code De Dietrich
H07.01

Burner fault, control box locked out

Blocking: it retries by itself

The oil burner's control and safety box has locked out (red light on the box): the ignition, the flame or the oil supply is at fault. On the CFU and CFU C this code does not clear by itself: the boiler stays off until the burner is reset with the button on its safety box.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show H07.01?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code H07.01

The meaning depends on the boiler: find yours below.

H07.01

Burner fault

Blocking: it retries by itself CFU, CFU C

What our technician checks

  • The ignition transformer, the ignition electrodes, the high-voltage wiring and the earthing
  • Alignment and condition of the flame detection cell
  • Position and condition of the combustion head
  • The oil supply: oil tap open, tank level, oil pump
  • Tightness of the oil supply line (air in the circuit)
  • The nozzle, which must not be blocked, and any flue gas recirculation
  • CFU: the preheater, replaced if faulty (lockout after 400 seconds)
  • The burner control and safety box, replaced if faulty

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.