Flow temperature sensor missing
Blocking: it retries by itself
A flow temperature sensor (the water going out to the heating) is missing or measures a temperature below its range; on the Virtuens it is the sensor of a zone connected to the SCB-10 extension board, on the CFU and CFU C the code comes from the SCB-04 board. On the Virtuens it is a temporary stop that clears once the cause has been removed; on the CFU and CFU C it is a temporary state during which the boiler tries to restart by itself.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Does the code stay on or come back? Do not take anything apart: call us.
Does your boiler show H00.00?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code H00.00
The meaning depends on the boiler: find yours below.
The flow temperature sensor is missing or a temperature below the range…
T flow open
What our technician checks
- The wiring between the circuit board and the sensor, and its connectors
- How the sensor is fitted
- The sensor's resistance value (CFU, CFU C)
- The sensor, replaced if necessary
- The circuit function setting, parameter CP02x (Virtuens)