Flue gas temperature too high
Blocking: it retries by itself
The flue gas temperature has gone above its maximum operating value, which can come from the flue system, a heat exchanger fouled on the flue side, or the sensor (C 230 Evo, AMC, AMC Pro Evo, Virtuens). It is a blocking fault: the boiler stops and starts again by itself once the cause is gone, but it is a flue gas code that our technician must check.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Do not reset the boiler: call us.
- Can you smell flue gases? Switch the boiler off, open the windows and call us.
Does your boiler show H.01.15?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code H.01.15
The meaning depends on the boiler: find yours below.
T flue gas max
The flue gas temperature has exceeded the maximum operating value
What our technician checks
- The flue system
- Fouling of the heat exchanger on the flue side
- The flue gas temperature sensor, replaced if faulty