Skip to Content
+32 15 62 70 80 info@ecowatt.be Mon-Thu 07:30-17:00, Fri 07:30-13:30 Request a repair
Repair
De Dietrich Fault code De Dietrich
E07.27

Safety thermostat tripped

Breakdown: the boiler is stopped

The safety thermostat, which shuts the boiler down when the water reaches 105 °C, has tripped: the water is not circulating (air in the system, pump, valves, water pressure) or the thermostat is badly connected. On the Modulens O AFC-S it is a lockout: the boiler stops, the screen flashes red, and it only starts again once the cause has been removed and the boiler has been reset.

What you can do

  1. Write down the code shown and the boiler model (on the rating plate).
  2. Reset the boiler once only.
  3. If the code comes back, do not keep trying and do not take anything apart: call us.

Does your boiler show E07.27?

Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.

* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.

The variants of code E07.27

The meaning depends on the boiler: find yours below.

E07.27

Safety thermostat tripped

Breakdown: the boiler is stopped Modulens O AFC-S

What our technician checks

  • Bleeding the air from the heating system
  • Water circulation: direction, pump and valves
  • The water pressure
  • Cleanliness of the heat exchanger
  • The wiring between the CU-OH-02 circuit board and the thermostat
  • How the thermostat is fitted, replaced if necessary

Related codes

From the manufacturer's service manuals for Belgium. Each appliance has its own features: if in doubt, call us.