Flue gas temperature too high
Breakdown: the boiler is stopped
The boiler's flue gases have gone above their maximum temperature; depending on the model the cause may be a blocked chimney, the gas valve setting, the flue gas sensor or the heat exchanger. On AMC 24/28 BIC, AMC Pro Evo, MPX2 Compact and Virtuens boilers it is a lockout: the boiler stops and only starts again after our technician has removed the cause and reset it.
What you can do
- Write down the code shown and the boiler model (on the rating plate).
- Do you smell flue gases? Switch the boiler off, open the windows, leave the premises and call us.
- Do not reset the boiler: call us.
Does your boiler show E04.06?
Repair visit: 180 € excl. VAT (190.80 € incl. 6 % VAT*), first hour included, parts excluded.
* 6 % VAT: work on a private home more than 10 years old, invoiced to a private person. Without a written objection within a month of the invoice, you confirm that these conditions are met; otherwise the VAT is 21 % and the responsibility is yours.
The variants of code E04.06
The meaning depends on the boiler: find yours below.
Max flue temp
T flue gas max.
Critical flue gas temperature reached
What our technician checks
- The chimney and the flue gas path: nothing must block them
- The gas valve setting
- The flue gas sensor's operation and fitting
- The heat exchanger, replaced if needed